메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김형준 (전북대학교 섬유공학과) 정윤호 (전북대학교 섬유공학과) 길명섭 (전북대학교 섬유공학과) 김학용 (전북대학교 섬유공학과) 방호주 (전북대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제41권 제6호
발행연도
2004.1
수록면
424 - 432 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The exploitation of technologies based on electro spinning have been limited due to poor understanding of the process and consequent limitation in process control, productivity and reproducibility. To control the effect of the environmental parameter, which is one of important electro spinning parameters, the vacuum process was introduced because the magnitude of electric field in vacuum is not limited by the low dielectric breakdown strength of air. For this study, PCL dissolved in a mixture of N,N-dimethylformamide (DMF) and methylene chloride (MC) was electrospun as a form of nonwoven mats consisting of nano-sized fibers under vacuum and they have been analyzed using SEM and DSC. The PCL nonwoven mats via electrospinning under vacuum showed the characteristic spinning behavior observed at atmospheric pressure. In addition, results obtained from tensile test showed that PCL nonwoven mats via electro­spinning under vacuum have better mechanical properties than those prepared at atmospheric pressure.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0