메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Abdallah Barakat (Southeast University) BeiBei (Southeast University)
저널정보
한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.13 No.3
발행연도
2020.9
수록면
570 - 582 (13page)
DOI
10.5293/IJFMS.2020.13.3.570

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents the numerical analysis on the aerodynamic flows and noise of serrated blades axial fan. Unsteady flow and noise analysis were simulated with an embedded SST k-ω turbulence model and Ffowcs-Williams Hawking’s equation. Nine modified axial fan blades models are evaluated and compared with the original model. It was confirmed that the original models concord with the experimental results of the performance curve. The effectiveness of serration is investigated with different values and ratios of amplitude (h) as well as spanwise wavelength (λ). The results indicated that a large reverse flow vortex obtained in the original model compared to serrated models. Remarkably, the serration edges showed an efficient noise reduction achieved by models λ/h=0.25 and λ/h=1, which reduced the noise by 14 ㏈ and 4.2 ㏈, respectively. Besides a noise reduction up to 11.4 ㏈ was achieved using different values of λ and h at the same serration ratio.

목차

Abstract
1. Introduction
2. Numerical simulation
3. Results and discussion
4. Conclusions
References

참고문헌 (24)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-554-001280398