메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
정연국 (영남대학교) 신기열 (영남대학교) 김준환 (에스엘)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
360 - 365 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, an experiment was conducted to investigate the heat dissipation performance by changing installation angles and the design shape of a heat sink in the automotive LED(Light Emitting Diode) lamps. The surface convective heat transfer coefficient can be derived through the heat dissipation performance test according to the installation angles as vertical and horizontal directions. The general thermal performance test of heat sink was performed at the natural convection experimental conditions. As a result, the heat sink installation angle of 90° by the horizontal direction showed the best heat dissipation performance, and when convective holes are added, the junction temperatures were measured lower than normal shape as 2.4~2.8℃ less because of the fin surface heat transfer improvement. However, as conductive heat resistance in the basement increases by the number of holes, the optimal design condition of the convective hole was existed for improving the total heat dissipation performance.

목차

Abstract
1. 서론
2. 연구내용
3. 연구결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0