메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최성호 (중앙대학교) 유재윤 (중앙대학교) 김성은 (중앙대학교) 박진철 (중앙대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제33권 제5호
발행연도
2021.5
수록면
233 - 243 (11page)
DOI
10.6110/KJACR.2021.33.5.233

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The floor structure of the floor radiant heating system of most apartment houses in Korea adopts the standard floor structure advised by the Ministry of Land, Infrastructure, and Transport in order to resolve the noise dispute between floors. In such a floor structure, when the supply of hot water is stopped when the heat storage part of the mortar is shortened during intermittent heating, the surface temperature drops rapidly and it is difficult to expect a continuity in the temperature level. In order to resolve this problem, PCM with excellent heat storage performance was added to the floor radiant heating system. In addition, an optimal PCM insertion location was proposed in order to show more efficient heat storage performance. Two mock-up laboratories have been established to compare the heat storage performance of a standard floor radiant heating system and a PCM applied floor radiant heating system. The PCM was inserted at the top, side, and bottom of the hot water pipe and the temperature change was measured through the introduction of a heating schedule. The experiment confirmed that when the PCM was inserted at the bottom of the hot water pipe, the rising rate and persistence of the floor surface temperature and indoor temperature were higher than that of the general room, making it advantageous to insert the PCM at the bottom.

목차

Abstract
1. 연구배경 및 목적
2. Mock-up 실험실 구축
3. 실험 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0