메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정용기 (중앙대학교) 김성은 (중앙대학교) 유민상 (중앙대학교) 송용우 (중앙대학교) 박진철 (중앙대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제34권 제8호
발행연도
2022.8
수록면
353 - 358 (6page)
DOI
10.6110/KJACR.2022.34.8.353

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
This study conducted a comparative experiment of PCM melting temperature using a chamber for the purpose of providing basic data, to apply PCM to an underfloor radiant heating system. The underfloor radiant heating system in the chamber applied the standard floor structure of the apartment building, and the changes in indoor temperature and floor surface temperature were compared when none-PCM, 44℃, 35℃, and 28℃ PCM were applied to the lower part of the heating pipe. As a result of the experiment, the time required to reach the maximum temperature after operating the boiler at the indoor air temperature, was the fastest when PCM was not applied. And in the case of the floor surface temperature, the time to reach the maximum temperature was the fastest at 28℃ PCM. However, the time to reach the minimum temperature after the boiler stop, that is, the time to maintain heat, was the longest for indoor as well as floor surface temperatures, when 35℃ PCM was applied.

목차

Abstract
1. 서론
2. 챔버 실험
3. 실험 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-553-001630328