지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.21 No.1
- 발행연도
- 2016.1
- 수록면
- 37 - 55 (19page)
이용수
초록· 키워드
오류제보하기
In this study, the influence of centrally placed circular and square cutouts on vibration and buckling characteristics of different ply-oriented laminated panels under the action of compressive and/or tensile types of nonuniform in-plane edge loads are investigated. The panels are inspected under the action of uniaxial compression, uniaxial tension and biaxial, compression-tension, loading configurations. Furthermore, the effects of different degrees of edge restraints and panel aspect ratios are also addressed in this work. Towards this, a nine-node heterosis plate element has been adopted which includes the effect of shear deformation and rotary inertia. According to the results, the tensile buckling loads are higher than that of compressive buckling loads. However, the tensile buckling load continuously reduces with the increased cutout sizes irrespective of ply-orientations. This is also true for compressive buckling loads except for some particular ply-orientations with higher sized cutouts.
목차
등록된 정보가 없습니다.
참고문헌 (34)
참고문헌 신청
B. Afsharmanesh / 2014 / Buckling and vibration of laminated composite circular plate on Winkler-type foundation / Steel and Composite Structures, An International Journal 17(1):1~19
Erkin Altunsaray / 2014 / Buckling of symmetrically laminated quasi-isotropic thin rectangular plates / Steel and Composite Structures, An International Journal 17(3):305~320
Ahmed S. Ashour / 2003 / Buckling and vibration of symmetric laminated composite plates with edges elastically restrained / Steel and Composite Structures, An International Journal 3(6):439~450
Aydin Komur, M. / 2008 / Elastic buckling of rectangular plates under linearly varying inplane normal load with a circular cutout / Mech. Res. Commun. 35(6):361~371
Baba, B.O. / 2007 / Buckling behavior of laminated composite plates / J. Reinf. Plast. Compos. 26(16):1637~1655
Erkin Altunsaray / 2014 / Buckling of symmetrically laminated quasi-isotropic thin rectangular plates / Steel and Composite Structures, An International Journal 17(3):305~320
Ahmed S. Ashour / 2003 / Buckling and vibration of symmetric laminated composite plates with edges elastically restrained / Steel and Composite Structures, An International Journal 3(6):439~450
Aydin Komur, M. / 2008 / Elastic buckling of rectangular plates under linearly varying inplane normal load with a circular cutout / Mech. Res. Commun. 35(6):361~371
Baba, B.O. / 2007 / Buckling behavior of laminated composite plates / J. Reinf. Plast. Compos. 26(16):1637~1655
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Buckling of axially compressed composite cylinders with geometric imperfections
Steel and Composite Structures, An International Journal
2018 .01
-
Position optimization of circular/elliptical cutout within an orthotropic rectangular plate for maximum buckling load
Steel and Composite Structures, An International Journal
2018 .01
-
Optimum design for thermal buckling of composite plates with semi triangular cutout using PSO algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2021 .10
-
Buckling behavior of composite cylindrical shells with cutout considering geometric imperfection
Steel and Composite Structures, An International Journal
2019 .01
-
Influence of stiffener edge on the buckling load of holed composite plates
Steel and Composite Structures, An International Journal
2018 .01
-
Optimum arrangement of stiffener on the buckling behaviour of stiffened composite panels with reinforced elliptical cutouts subjected to non-uniform edge load
Steel and Composite Structures, An International Journal
2022 .02
-
Curvilinear free-edge form effect on stability of perforated laminated composite plates
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Non-Linear dynamic pulse buckling of laminated composite curved panels
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Curvilinear free-edge form effect on stability of perforated laminated composite plates
Structural engineering and mechanics : An international journal
2017 .01
-
Mechanical and thermal buckling analysis of laminated composite plates
Steel and Composite Structures, An International Journal
2021 .09
-
Buckling Characteristics of Skin-Stringer Composite Stiffened Panel
항공우주시스템공학회지
2020 .12
-
Analysis of stiffened Al/SiC FGM plates with cutout under uniaxial and localized in-plane edge loadings
Structural Engineering and Mechanics, An Int＇l Journal
2024 .03
-
Shear buckling analysis of cross-ply laminated plates resting on Pasternak foundation
Structural engineering and mechanics : An international journal
2018 .01
-
Buckling load optimization of laminated composite stepped columns
Structural engineering and mechanics : An international journal
2017 .01
-
Buckling and dynamic characteristics of a laminated cylindrical panel under non-uniform thermal load
Steel and Composite Structures, An International Journal
2016 .01
-
엔진 폭발하중을 고려한 커넥팅로드의 좌굴해석에 관한 연구
한국기계기술학회지
2015 .01
-
Buckling load optimization of laminated composite stepped columns
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Buckling characteristics and static studies of multilayered magneto-electro-elastic plate
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Comparative study between inelastic compressive buckling analysis and Eurocode 3 for rectangular steel columns under elevated temperatures
Steel and Composite Structures, An International Journal
2022 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0