지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.4
- 수록면
- 63 - 75 (13page)
- DOI
- 10.5143/JESK.2022.41.2.63
이용수
초록· 키워드
오류제보하기
Objective: This study analyzes occupational risk and health problems, and job satisfaction of workers in the metal material, parts, and equipment industries according to working hours.
Background: In the global trade environment, the materials, parts and equipment industries are the basis of national industrial competitiveness. There are differences in the working environment, health problems, and job satisfaction according to working hours.
Method: 1,578 workers were extracted from the 5th Korean Working Condition Survey data. Among them, 803 (10.9%) worked less than or equal to 40 hours and 775 (49.1%) worked more than 40 hours per week.
Results: Overall, they had a lot of exposure to risk factors. In addition, the exposure to risk factors of the group working more than 40 hours per week was more frequent than the group working less than 40 hours, except for the exposure to the sitting position. Except for hearing loss, the problem and pain complaint rate were higher in the group working more than 40 hours per week. Longer working hours has a negative effect on work-life balance, but the degree of participation in decision-making about work, social support by supervisors, and the organizational atmosphere were all positively evaluated among respondents who worked more than 40 hours per week. Overtime workers feel low organizational satisfaction, and in particular, have a statistically significant negative perception of compensation.
Conclusion: It was found that the longer the working hours were, the more problems with health, musculoskeletal system, and health condition were. Efforts and support to create a safe workplace through improvement of working hours are required.
Application: The results can be used as basic data on improving working condition especially for the working hours and reducing work-related risk factors and health-related problems of metal workers.
Background: In the global trade environment, the materials, parts and equipment industries are the basis of national industrial competitiveness. There are differences in the working environment, health problems, and job satisfaction according to working hours.
Method: 1,578 workers were extracted from the 5th Korean Working Condition Survey data. Among them, 803 (10.9%) worked less than or equal to 40 hours and 775 (49.1%) worked more than 40 hours per week.
Results: Overall, they had a lot of exposure to risk factors. In addition, the exposure to risk factors of the group working more than 40 hours per week was more frequent than the group working less than 40 hours, except for the exposure to the sitting position. Except for hearing loss, the problem and pain complaint rate were higher in the group working more than 40 hours per week. Longer working hours has a negative effect on work-life balance, but the degree of participation in decision-making about work, social support by supervisors, and the organizational atmosphere were all positively evaluated among respondents who worked more than 40 hours per week. Overtime workers feel low organizational satisfaction, and in particular, have a statistically significant negative perception of compensation.
Conclusion: It was found that the longer the working hours were, the more problems with health, musculoskeletal system, and health condition were. Efforts and support to create a safe workplace through improvement of working hours are required.
Application: The results can be used as basic data on improving working condition especially for the working hours and reducing work-related risk factors and health-related problems of metal workers.
목차
1. Introduction
2. Method
3. Results
4. Discussion and Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
IT산업 근로환경 실태조사
대한설비관리학회지
2019 .01
-
장시간 노동과 조직유효성 간 관계 - 일-생활 균형의 조절효과와 직무소진의 매개효과 -
인적자원관리연구
2019 .01
-
자동차 운전원의 작업환경, 일-생활 균형, 건강문제에 관한 연령대별 특성 비교
대한인간공학회지
2022 .04
-
근로자의 근로시간과 스트레스와의 관련성
한국산학기술학회 논문지
2022 .01
-
사무직, 기능직, 단순노무직 건설업 근로자의 유해요인노출시간 및 건강문제 비교
대한인간공학회지
2023 .04
-
간호사와 간호조무사의 근로환경 및 유해요인 노출시간과 건강관련 문제의 비교
대한인간공학회지
2023 .06
-
근골격계통증 관련요인이 건설업 근로자의 심리적 건강에 미치는 영향
대한인간공학회지
2023 .10
-
근로시간 단축에 따른 건설 공사의 공사비 영향 분석 - 직접 노무비 중심으로 -
대한건축학회연합논문집
2021 .12
-
교통소통 정보기반 신호교차로 운영평가를 위한 혼잡강도 지표 임계값 연구
한국도로학회논문집
2018 .01
-
Planning and Scheduling of Manpower in an Annualized Hours Environment Integrating Workers Willingness and Efficiency
Industrial Engineering & Management Systems
2019 .03
-
자동차 제조업의 사무직과 생산직 근로자의 작업위험요인 및 건강 관련 특성 비교
대한인간공학회지
2021 .06
-
근로시간 단축에 따른 건설산업의 대응방안
대한토목학회지
2018 .08
-
근무시간과 휴양시간이 인적오류예방에 미치는 영향에 관한 연구 - 도시철도 기관사를 중심으로 -
한국도시철도학회논문집
2021 .06
-
해석 가능한 머신러닝 모델을 이용한 입력 시계열 길이가 예측 성능에 미치는 영향 분석
대한건축학회 학술발표대회 논문집
2023 .04
-
재생에너지 클라우드 플랫폼 기능 확장을 위한 지역별 연중 대표 24시간대 태양광 발전량 산정 방법론
한국태양에너지학회 논문집
2022 .10
-
작업-휴식 주기 변화에 따른 허리 굴곡 작업의 작업 부하 비교
대한인간공학회지
2019 .06
-
노인의 수면에 영향을 미치는 요인: 제8기 국민건강영양조사 자료(2019~2020) 활용
한국산학기술학회 논문지
2022 .09
-
한국 전력시스템의 240시간 전력수요예측에 대한 딥러닝 모델과 학습기법
전기학회논문지
2022 .04
-
대형 조선소 관리감독자 교육 개선에 관한 연구
한국안전학회지
2017 .01
-
주관적 과잉근로가 건강에 미치는 영향: 위험지각의 조절효과
한국안전학회지
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0