메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Hongge Yan (Hunan University) Qin Wu (Hunan University) Jihua Chen (Hunan University) Weijun Xia (Hunan University) Min Song (Central South University) Bin Su (Hunan University) Biao Huang (Hunan University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.28 No.3
발행연도
2022.3
수록면
745 - 754 (10page)
DOI
10.1007/s12540-020-00879-3

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The dynamic recrystallization (DRX), precipitation and texture evolution of the ZK60 alloy sheets rolled at 300 °C withdifferent strain rates were studied, and the effects of texture on the plasticity were also clarified. The DRX grain sizes at fivestrain rates (5?25 s?1) are 1.4 μm, 1.2 μm, 1.8 μm, 2.4 μm and 2.8 μm, respectively, while the DRX volume fractions are35.8%, 75.0%, 82.0%, 88.0% and 93.0%, respectively. The maximum intensity values of the (0002) texture are 7.91, 8.22,7.64, 5.76 and 5.34 at five strain rates, respectively. The strongest (0002) texture is observed at the strain rate of 10 s?1,which is related to the relatively low DRX volume fraction and the precipitation density. The tensile strength (UTS) and yieldstrength (YS) increases firstly and then decreases, while the elongation (EL) gradually increases with increasing the strainrate, suggesting that the plasticity of the alloy sheet can be improved by decreasing the basal texture intensity and increasingthe dispersion degree of the basal texture. The optimal comprehensive mechanical properties are obtained at the strain rateof 10 s?1, with UTS of 358 MPa, YS of 291 MPa and EL of 21.5%.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0