지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.4
- 수록면
- 1,195 - 1,201 (7page)
- DOI
- 10.1007/s12540-022-01282-w
이용수
초록· 키워드
오류제보하기
A superior combination of the ultra-high tensile strength (~ 419.9 MPa), the yield strength (~ 376.9 MPa) and the elongation(~ 14.8%) ZK60 sheet was successfully achieved by high-strain rate rolling. The ultrahigh strength was attributed to theuniform ultrafine-grained structure. The excellent ductility was ascribed to the ultrafine grains, low dislocation density andweakened basal texture in the final structure.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of Addition of Rare Earth Elements on the Microstructure, Texture, and Mechanical Properties of Extruded ZK60 Alloy
Metals and Materials International
2023 .06
-
Influences of Rare-Earth Y Addition on the Microstructures, Mechanical Properties and Stacking Faults of ZK60 Alloys by Powder Metallurgy
Metals and Materials International
2024 .03
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
ZK60합금의 쌍정생성에 미치는 결정방위와 온도의 영향
한국소성가공학회 학술대회 논문집
2024 .10
-
Effect of Strain Rate on the Microstructure and Texture Evolution of the ZK60 Alloy Sheets
Metals and Materials International
2022 .03
-
Experimental and Modelling Study of Ultra-Fine Grained ZK60 Magnesium Alloy with Simultaneously Improved Strength and Ductility Processed by Parallel Tubular Channel Angular Pressing
Metals and Materials International
2021 .01
-
Effect of Multipass Friction Stir Processing on Surface Corrosion Resistance and Wear Resistance of ZK60 Alloy
Metals and Materials International
2019 .01
-
Attaining Yield Symmetry of ZK60 Mg Alloy through AMulti-Pass Caliber Rolling
한국소성가공학회 학술대회 논문집
2019 .10
-
Creep Behavior of ZK60 Alloy and ZK60/SiCw Composite After Extrusion and Precipitation Hardening
Metals and Materials International
2021 .10
-
Strain Distributions of Plane-Strained and Simple-Sheared Al?Mg Alloy
Metals and Materials International
2021 .11
-
Microstructure, Mechanical Properties and Strain Hardening Behavior of Alternative α/β Mg-Li Composite Sheets Prepared by Accumulative Roll Bonding
Metals and Materials International
2022 .05
-
Ultrahigh-Strength and Ductile AISI 316L Steel Processed by Cryogenic Rolling
Metals and Materials International
2024 .06
-
마그네슘합금의 초소성 특성과 응용
한국재료학회지
2017 .01
-
7천계 알루미늄 판재의 고온에서 변형율 속도에 따른 파단 변형율
대한기계학회 춘추학술대회
2020 .07
-
Ultra-High Strength Mg-9Gd-4Y-0.5Zr Alloy with Bi-Modal Structure Processed by Traditional Extrusion
Metals and Materials International
2016 .01
-
Achieving High Strength and Ductility via Cross-Shear Deformation in AZ31 Magnesium Alloys
한국소성가공학회 학술대회 논문집
2017 .05
-
Effects of Mg and Cu Additions on Superplastic Behavior in MA Aluminum Alloys
한국재료학회지
2018 .01
-
검증 가능한 계산을 위한 zk-SNARK에 대한 분석
한국정보과학회 학술발표논문집
2018 .06
-
온도 및 변형률 속도가 316L(N)강의 강도 및 연성에 미치는 영향
대한기계학회 춘추학술대회
2018 .02
-
Effect of Ce Addition on the Tribological Behavior of ZK60 Mg-Alloy
Metals and Materials International
2021 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0