지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
The Formability of magnesium alloy sheet deformed texture initially
한국소성가공학회 학술대회 논문집
2015 .10
The research of formability on magnesium alloy of deformation texture
한국소성가공학회 학술대회 논문집
2015 .05
Microstructure and Mechanical Properties of a Basal Textured AZ31 Magnesium Alloy Cryorolled at Liquid-Nitrogen Temperature
Metals and Materials International
2016 .01
집합조직 제어를 통한 마그네슘 판재의 성형성 향상
한국소성가공학회 학술대회 논문집
2016 .10
Differential Speed Rolling of Twin-Roll-Cast 6xxx Al Alloy Strips and Its Influence on the Sheet Formability
Metals and Materials International
2016 .01
마스네슘 합금 판재 (AZ31)의 온도별 성형 특성 분석
한국금형공학회지
2018 .01
Effect of electric current on dissolution of Mg17Al12 phase in as-extruded AZ91 magnesium alloy
한국소성가공학회 학술대회 논문집
2016 .04
성형 한계 시험을 통한 AZ31B 마그네슘 판재의 온간 성형성 평가
한국자동차공학회 춘계학술대회
2019 .05
마그네슘 합금 판재(AZ31B)의 온도 및 성형속도에 따른 2D-draw 굽힘 특성 분석
한국기계기술학회지
2019 .01
마그네슘 합금 판재(AZ31B)의 굽힘 변형에서 음향 방출 신호 특성 분석
한국소성가공학회 학술대회 논문집
2022 .12
Improvement in bending formability of rolled magnesium alloy through precompression and subsequent annealing
한국소성가공학회 학술대회 논문집
2019 .10
마그네슘 합금 판재의 온간 V-굽힘에서 소재의 변형 및 보토밍 공정의 효과 분석
소성·가공
2018 .06
Research and Development in Magnesium Alloys for Industrial and Biomedical Applications: A Review
Metals and Materials International
2020 .01
Al 합금 판재의 열간 비대칭 압연과 성형성 변화
한국소성가공학회 학술대회 논문집
2016 .10
고온변형압축시험에서의 AZ91마그네슙함급의 미세조직 및 집합조직의 형성거동
한국소성가공학회 학술대회 논문집
2019 .10
자동차용 강판의 변형 모드에 따라 변형률속도가 성형성에 미치는 영향
한국소성가공학회 학술대회 논문집
2016 .04
Preparation and Effect Analysis of {10?12} Extension Twins at the Edge of AZ31 Magnesium Alloy Plate
Metals and Materials International
2021 .11
The properties of the magnesium alloy sheet according to the compressive direction
한국소성가공학회 학술대회 논문집
2016 .04
Analysis of Springback Characteristics of Magnesium Alloy Sheet (AZ31B) Considering Time-Dependence in Warm Bending
Journal of the Korean Society for Precision Engineering
2020 .03
0