지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.6
- 수록면
- 23 - 34 (12page)
이용수
초록· 키워드
오류제보하기
Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment.
Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37°C. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the “stressed” position in a 37°C water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days.
Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level.
Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.
Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37°C. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the “stressed” position in a 37°C water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days.
Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level.
Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.
목차
Introduction
Materials and Methods
Result
Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Changes in force associated with the amount of aligner activation and lingual bodily movement of the maxillary central incisor
대한치과교정학회지
2016 .03
-
Intraoral ageing of aligners and attachments: Adverse effects on clinical efficiency and release of biologically-active compounds
대한치과교정학회지
2024 .07
-
NiTi 호선을 이용한 초기 배열 후 디지털 방식 투명교정장치의 적용
대한치과의사협회지
2016 .07
-
Integrated three-dimensional digital assessment of accuracy of anterior tooth movement using clear aligners
대한치과교정학회지
2015 .11
-
Effectiveness of Invisalign® aligners in the treatment of severe gingival recession: A case report
대한치과교정학회지
2021 .07
-
Orthodontic treatment with clear aligners for a patient with chronic periodontitis
대한치과교정학회지
2022 .11
-
Comparison of the predicted and achieved labiolingual inclinations of the maxillary central incisors in adult Class II division 2 malocclusions treated with clear aligners
대한치과교정학회지
2024 .11
-
Maxillary alveolar bone evaluation following dentoalveolar expansion with clear aligners in adults: A cone-beam computed tomography study
대한치과교정학회지
2023 .07
-
Correction to: Treatment of anterior open bites using non-extraction clear aligner therapy in adult patients
대한치과교정학회지
2022 .09
-
Evaluation of the effect of attachments on torque control of palatally positioned maxillary lateral teeth with clear aligners: Finite element analysis
대한치과교정학회지
2025 .01
-
Evaluation of different designs of 3D printed clear aligners on mandibular premolar extrusion using force/moment measurement devices and digital image correlation method
대한치과교정학회지
2024 .11
-
Treatment of anterior open bites using non-extraction clear aligner therapy in adult patients
대한치과교정학회지
2022 .05
-
Pain perception among patients treated with passive self-ligating fixed appliances and Invisalign® aligners during the first week of orthodontic treatment
대한치과교정학회지
2018 .09
-
투명 장치의 열가소성 재료의 올바른 이해
대한치과의사협회지
2016 .07
-
Biomechanical analysis for different mandibular total distalization methods with clear aligners: A finite element study
대한치과교정학회지
2023 .11
-
The combined use of computer-guided, minimally invasive, flapless corticotomy and clear aligners as a novel approach to moderate crowding : A case report
대한치과교정학회지
2017 .03
-
Evaluation of the effects of the third molar on distalization and the effects of attachments on distalization and expansion with clear aligners: Three-dimensional finite element study
대한치과교정학회지
2025 .01
-
External apical root resorption 6 months after initiation of orthodontic treatment: A randomized clinical trial comparing fixed appliances and orthodontic aligners
대한치과교정학회지
2021 .09
-
가속노화 효과에 의한 치과용 3D 프린터 출력물의 변형도 평가
대한치과재료학회지
2017 .03
-
Predictability of maxillary dentoalveolar expansion with clear aligners in patients with mixed dentition
대한치과교정학회지
2025 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0