지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Adhesive joints have many advantages such as weight savings, corrosion and fatigue resistance and now developed even withstand of high impact and dynamic loads. However, an adhesion has cumbersome and complicated surface preparation processes. The surface preparation step is critical in adhesive joint manufacturing in order to obtain the prescribed strength for adhesive joints. In this study, it was attempted to simplify and reduce the number of surface preparation steps, and abrasion and rapid adhesive application (ARAA) process is developed for an alternative solution. The abrasion processes are performed only for creating surface roughness in standard procedures (SP), although the abrasion processes cause surface activation itself. The results showed that there is no need the long procedures in laboratory or chemical agents for adhesion. After the abrasion process, the attracted and highly reactive fresh surface layer obtained, and its effect on bonding success is observed and analyzed in this research, in light of the essential physic and adhesion theories. Al 6061 aluminum adherends and epoxy-based adhesives were chosen for bonding processes, which is mostly used in light vehicle parts. The adherends were cleaned, treated and activated only with abrasion, and after the adhesive application the specimens were tested under quasi-static loading. The satisfied ARAA results were compared with that of the specimens fabricated by the standard procedure (SP) of adhesion processes of high impact loads.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Functional Adhesives: from Medical to Eco-friendly Adhesives
한국생물공학회 학술대회
2021 .10
-
Numerical analysis of the combined aging and fillet effect of the adhesive on the mechanical behavior of a single lap joint of type Aluminum/Aluminum
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Effects of Surface Modification by Plasma on Adhesion of Pressure-Sensitive Adhesives for Display Applications
한국고분자학회 학술대회 연구논문 초록집
2022 .10
-
기계적/전기화학적 표면처리가 알루미늄-에폭시의 접합강도 향상에 미치는 영향
한국표면공학회지
2016 .12
-
해빙 충격에 의한 해양구조물 콘크리트 구조의 마모 특성 고찰
한국CDE학회 학술발표회 논문집
2016 .01
-
Preparation and Adhesion Performance of Biomass-based Transparent Pressure Sensitive Adhesives
한국고분자학회 학술대회 연구논문 초록집
2018 .10
-
Natural Adhesives from Agricultural By-products: A Review
한국농업기계학회 학술발표논문집
2017 .01
-
Characterization of Tissue-Adhesive Materials Using Biopolymers
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
Tissue-adhesive Film Using Natural Macromolecules
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
A flexible nano adhesive with high transparency, strong adhesion and curable in sub-minute, adhesive film
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
에폭시 접착제의 탄소나노튜브 함량과 경화시 습도 변화에 따른 GFRP 및 CFRP의 접착강도 변화 평가
접착 및 계면
2022 .03
-
Fabrication of Low-adhesive Polymer using Pore Network
대한기계학회 춘추학술대회
2021 .05
-
Adhesion of Industrial Lignin-Based Polyurethane Adhesives for Wood Bonding
한국고분자학회 학술대회 연구논문 초록집
2023 .10
-
Shear Strength of an Aluminum Alloy Bonded with a DP-460 Adhesive: Single Lap–shear Joints
접착 및 계면
2020 .01
-
구조용 접착제의 내충격성 향상을 위한 포뮬레이션 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
Study of Adhesion according to Various Surface Treatments for Lithium Ion Secondary Battery Pouch Film
Journal of the Korean Society for Precision Engineering
2016 .03
-
침질경화 열처리에 따른 마모 특성
한국기계가공학회 춘추계학술대회 논문집
2018 .04
-
Automatic Adhesive Bonding Machine의 구조적 특성에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2019 .04
-
Automatic Adhesive Bonding Machine의 구조적 특성에 관한 연구Ⅱ
한국기계가공학회 춘추계학술대회 논문집
2020 .06
-
Study on the Adhesive Strength by the Manufacturing Process Parameter of the Aluminum Pouch for Secondary Battery
Journal of the Korean Society for Precision Engineering
2016 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0