메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
조수용 (경상대학교) 조종현 (위드피에스)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제26권 제6호(통권 제141호)
발행연도
2023.12
수록면
100 - 109 (10page)
DOI
10.5293/kfma.2023.26.6.100

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Portable diesel engine generator sets are used at offsite power grid or for emergency power. Therefore, a protective device called an enclosure is necessary for safety as well as protection of the generation device. However, the temperature within the enclosure must be within a limited range so that there is no problem in the operation of electronic devices. In this study, an enclosure design for a 150 kW generation set was conducted through a numerical analysis. Eight inlets were applied on the side, and one outlet was installed on the top. In conclusion, the air sucked in by the radiator fan could dissipate the heat generated from the generator, engine, and muffler. Therefore, the temperature surround the electronic control box was maintained below 10 K, and the role of the air drawn in each intake was also investigated.

목차

ABSTRACT
1. 서론
2. PDGS 구조 및 인클로저
3. 열유동해석을 위한 검정
4. 결과 및 분석
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0