메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 춘 추계 학술대회 논문집 한국자동차공학회 2005년 추계학술대회논문집 Vol.Ⅰ
발행연도
2005.11
수록면
473 - 478 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The effects of sulfur contents on the performance of the metal foam DPF (Diesel Particulate Filter) were investigated. The metal foam, INCOFOAM? High Temp, was axially stacked in the exhaust pipe to reduce PM emissions. LSD (Low Sulfur Diesel) fuel which has sulfur content of about 300 ppm and ULSD (Ultra Low Sulfur Diesel) fuel which has sulfur content of below 50 ppm were used to compare the emissions. When the DOC (Diesel Oxidation Catalyst) was installed upstream of DPF and the LSD fuel was used, the PM reduction rates at high exhaust temperature were deteriorated because the DOC oxidized sulfur dioxide at high exhaust temperature which eventually forms sulfate particles during dilution. With DOC, BPT (Balance Point Temperature) was lowered from 420℃ to 360℃ due to the NO₂ formation inside the DOC, which is favorable for the DPF regeneration. Accordingly, when ULSD was used, the combination of DOC and DPF showed PM reduction rate of 70% and relatively low pressure difference across DPF, which are acceptable performance for DPF.

목차

Abstract

1. 서론

2. 실험장치 및 실험방법

3. 결과 및 토론

4. 결론

후기

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-015137208