지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
In order to achieve the desired lightweight and robust design of a structure, it is preferable to design a structure and its control system, simultaneously, which is termed the combined optimal design. A constant-cross-sectional area cantilever beam was chosen as the optimum design method. An initial load and a time-varying disturbance were applied at the free end of the beam. Sliding mode control was selected, due to its insensitivity to the disturbance, compared with other modes. It is known that the sliding mode control is robust to the disturbance and is uncertain, only if a matching condition is met, after giving a switching hyper plane. In this study, the optimum method was used for the design of the switching hyper plane, and the objective function of the optimum switching hyper plane was assumed to be the objective of the control system. The total weight of the structure was treated as a constraint, and the cross sectional areas of the beam were considered as design variables, the result being a nonlinear programming problem. To solve it, the sequential linear programming method was applied. As a result of the optimum design, the effect of attenuating vibrations has been substantially improved. Moreover, the lightweight design of the structure became possible as a result of the relationship of the weight of the structure to the control objective function.
목차
ABSTRACT
1. Introduction
2. System Modeling
3. Sliding Mode Control
4. Optimal Design of the Structure
5. Numerical Simulation
6. Conclusions
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Sliding Mode Control based on Linear Quadratic Cost Function for Position Control of Linear Stage
대한전자공학회 학술대회
2009 .07
-
PERFORMANCE IMPROVEMENT OF POSITION CONTROL SYSTEM WITH SLIDING MODE
ICPE(ISPE)논문집
1992 .04
-
PD -슬라이딩 모드 제어의 절환을 통한 강인한 SPMSM 속도 제어기 설계
제어로봇시스템학회 논문지
2010 .03
-
이온빔 배향법을 적용한 In-Plane Switching Mode
제어로봇시스템학회 합동학술대회 논문집
2006 .12
-
Sliding Mode Control Based on Pole-Placement Method for Position Control of Linear Stage
제어로봇시스템학회 국제학술대회 논문집
2009 .08
-
볼-빔 시스템에서 채터링 감소를 위한 슬라이딩 모드 제어 설계
대한전기학회 학술대회 논문집
2010 .07
-
A Study on the Optimal Model Following Sliding Mode Control
제어로봇시스템학회 국제학술대회 논문집
2001 .10
-
Position Control of D.C. Motor under the Disturbances by New Sliding Mode Control
제어로봇시스템학회 국내학술대회 논문집
1988 .10
-
Position Control of D. C. Motor under the Disturbances by New Sliding Mode Control
대한전자공학회 학술대회
1988 .01
-
슬라이딩 모드 외란 관측기와 제어기를 이용한 DC 모터 전류 제어기 설계
제어로봇시스템학회 논문지
2016 .06
-
PMSM Speed Controller Using switching algorithm of PD and Sliding Mode Control
제어로봇시스템학회 국제학술대회 논문집
2009 .08
-
빠르고 강건한 새로운 슬라이딩 제어기 설계
한국정밀공학회 학술발표대회 논문집
2018 .05
-
슬라이딩 모드 외란 관측기 기반 제어기를 이용한 기계 시스템의 위치 제어기 설계
전기학회논문지
2019 .07
-
볼-빔 시스템에서의 ε-슬라이딩 평면을 이용한 강인한 제어기 설계
전기학회논문지
2010 .08
-
Current Sliding Mode Control with a Load Sliding Mode Observer for Permanent Magnet Synchronous Machines
JOURNAL OF POWER ELECTRONICS
2014 .01
-
Active Vibration Suppression of a Flexible Structure Using Sliding Mode Control
Journal of Mechanical Science and Technology
2006 .08
-
Speed Control of Linear Induction Motor using Sliding Mode Controller Considering the End Effects
Journal of Electrical Engineering & Technology
2012 .01
-
Sliding Mode Control of a Manipulator Using New Switching Surfaces
JOURNAL OF KIEE
1993 .03
-
슬라이딩모드와 최적제어를 이용한 PMSM 제어
대한전기학회 학술대회 논문집
2009 .07
-
Novel Discrete Optimal Sliding Mode Control
제어로봇시스템학회 국제학술대회 논문집
2001 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-559-015530371