메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 추계학술대회 강연 및 논문 초록집
발행연도
2006.11
수록면
1 - 6 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (13)

초록· 키워드

오류제보하기
The pressure regulator which is used for controlling the reducing pressure in the piezoelectrically driven pneumatic valve has been studied. The pneumatic valve of this study object is 2-stage type and consists of a piezoelectric actuator, a controller, a poppet valve and a pressure regulator. Nominal flow of 50 lpm, maximum operating pressure of 0.9㎫ and frequency characteristic of 10㎐ and over are required in this pneumatic valve, but the pressure regulator is needed because piezoelectric actuator has no ability to control the pressure of 0.9㎫ directly. In this study, bimorph type PZT actuator of 25.2 ㎜(L)×7.2 ㎜(W)×0.5 ㎜(H) with constant of -220×10?¹² CN?¹ was proposed and investigated. Maximum operating force of 0.052 N and maximum displacement of 63 ㎛ were gotten from the fabricated PZT actuator. From the analysis results, the orifice diameter of 0.6㎜ for a piezoelectric actuator was derived and then the pressure regulator which can be operated under 0.15 ㎫ easily was designed and manufactured. Performance and effects of design parameters were simulated by the Simulink of Matlab software, and it was confirmed that the performance characteristics of manufactured pressure regulator are superior in the common use pressure range of 0.5 ㎫ to 0.7 ㎫. The results show that the proposed pressure regulator is suitable for the pneumatic valve with a PZT actuator.

목차

Abstract
1. 서론
2. 이론해석
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016806622