메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2005年度 秋季學術大會 論文集
발행연도
2005.12
수록면
150 - 154 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In the technical development of automobiles, environmental effort is risen with air pollution problem. Hydrocarbon (HC), one of dangerous pollutants in automobiles, is generated about 20~35% in total amount by crankcase blowby gas. A PCV valve eliminates this gas using recirculation loop to control it automatically using return spring. The PCV valve is very small component in an automotive engine but it is very important. Although it has very simple operating principle such as the spool is moved by force balance between fluid force and elastic force, designing a PCV valve is difficult for interaction between fluid and solid. In this study, our purpose is to develop a design program for PCV valve and we verify its efficiency. We used both Euler's equation and 4th order Runge-Kutta method to predict spool displacements and flow areas. Comparing with real products, we found that both spool diameter and displacement were predicted well. But, in comparison with flow rate we could found its difference because of the assumption of non viscous flow, that is Euler's equation.

목차

Abstract
1. 서론
2. 설계 프로그램
3. 실험 결과 및 고찰
5. 결론
참고 문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014982090