메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
함형창 박인환 박창용 (서울산업대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2009년도 동계학술발표대회
발행연도
2009.11
수록면
245 - 250 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this experimental study, a CPU cooling system with water was applied for cooling the CPU of a desk top computer, instead of a conventionally used air-cooled fin-fan type CPU cooler. The performance of the CPU water cooling system was measured with the variation of water flow rate from 0.6 to 1.3 L/min, radiator fan speed from 1300 to 2400 rpm, and CPU operating load from idle to full conditions. Time taking to reach a study state for the cooling system increased with the increase of water flow rate and fan speed. The measured temperature difference at the inlet and outlet of a waterblock and a radiator was influenced by the CPU load conditions and water flow rate, but the effect of fan speed on the temperature difference was minor. The temperature difference was less than 1.1℃ for all test conditions, which implied that the system cooling capacity was significantly higher than the heat generation rate of the CPU. The pressure drop of water at the inlet and outlet of the waterblock and radiator was relatively small and its values ranged from 0.5 to 3.2 ㎪.

목차

ABSTRACT
1. 서론
2. 워터블럭 설계 및 형상
3. 실험장치 및 방법
4. 실험결과 및 고찰
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-553-002593298