메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 2005년도 제41회 추계학술대회 및 정기총회
발행연도
2005.11
수록면
81 - 89 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Sliding bearing using low-speed and high-load is one of the most important parts in front parts of excavators, which is the presence of bushes made of an antifriction material. The sliding contact is realized through microscopic irregularities on the shaft and the bush, so the damage of bush results in the accumulation of plastic deformation which is accompanied by the appearance and development of microscopic discontinuities owing to material fracture and outside dust. Accumulation of microscopic damage in the material leads finally to macrofracture - the particles breaks off bush. The greasing interval is very important so as not to have the damage of bush. To prolong the greasing interval requires consistence of shaft and bush, which have high strength, wear resistance and lubrication with durability. To estimate the durability of the developed bush, we made an experiment in the rig test machine. From the results of the rig test for durability, the developed bush assesses the better commercially used carbonized bush and Cu bush.

목차

Abstract
1. 개요
2. 부시의 적용
3. 시험 장치 및 시험 조건
4. 시험 결과
5. 결론

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002318877