메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Kittiphan Techakittiroj (Assumption University of Thailand)
저널정보
제어로봇시스템학회 제어로봇시스템학회 국제학술대회 논문집 ICCAS 2008
발행연도
2008.10
수록면
2,667 - 2,670 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper analyses the characteristics of electrical plug and outlet in the DC distribution system. The circuit for a simulation of both plug and outlet in PSpice is given. The interest of using DC voltage in a building becomes more increasing. The plug and outlet are necessary parts to make the implementation of DC voltage system in a commercial building. The plug and outlet can be modeled as the double-pole single-throw switch. The normal snubber protection circuit cannot be used because of the isolation of the plug and outlet when they are disconnected. A solution has been proposed as a simple idea to reduce electrical spark when the plug and outlet are isolated from each other. The concept is modified version of the RCD snubber. The electrical spark is eliminated but the voltage rise at the outlet still exists. This high voltage happens in the short period and has only a small effect on the DC bus. This ripple in the DC bus should be acceptable by treating it as the voltage tolerance in the distribution system.

목차

Abstract
1. INTRODUCTION
2. MODEL
3. PLUG (LOAD SIDE)
4. OUTLET (DISTRIBUTION SIDE)
5. OVERALL SYSTEMS
6. CONCLUSION
7. ACKNOWLEDGMENT
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-569-000977727