지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
This study presents a novel two-phase eight stator poles and six rotor poles (8/6) switched reluctance machine (SRM) that can compensate for the vibration and noise problems of two-phase 6/3 SRM and compare the characteristics of two SRMs. In the case of two-phase 6/3 SRM, the short flux path and the flux direction inside the stator are not reversed, so they have high efficiency characteristics. However, the use of three rotor poles causes problems of vibration and noise because the radial force applied to the rotor poles is not balance. The proposed two-phase 8/6 SRM has advantages of 6/3 SRM such as the fluxreversal-free stator and it can improve vibration and noise by using six rotor poles due to balanced radial force acting on the rotor poles. In order to make a reasonable comparison between two SRMs, the electromagnetic field structure of 8/6 SRM is designed to have equivalent torque characteristic to 6/3 SRM and then the copper loss and core loss are compared and analyzed. Finally, we compare the effieicney of two SRMs using finite element analysis and compare the distribution of radial force acting on the rotor poles based on Maxwell’s stress method
목차
Abstract
1. 서론
2. 새로운 2상 8/6 SRM
3. 6/3 SRM과 제안한 8/6 SRM의 자기적 특성 비교
4. 시뮬레이션 해석 결과
5. 결론
References
참고문헌 (8)
참고문헌 신청
P. J. Lawrenson, J. M. Stephenson, P. T. Blenkinsop, J. Corda and N. N. Fulton, “Variable-speed switched reluctance motors”, Proc. IEE, vol. 127, Pt-B, no. 4, pp. 253-265, 1980.
R. Krishnan, Switched Reluctance Motor Drives, CRC Press, 2001.
A. E. Fitzgerald, Charles Kingsley, and Stephen D. Umans, Electric Machinery, 7th edition, Chapter 8, McGraw-Hill Education, 2013.
T. J. E Miller, Switched Reluctance Motor and Their Control, Clarendon Press. Oxford, pp. 25-35, 1993.
Seok-Gyu Oh, Krishnan, R., “Two-Phase SRM with Flux- Reversal-Free Stator : Concept, Analysis, Design, and Experimental Verification”, IEEE Trans. on IA, vol. 43, no. 5, pp. 1247-1257, Sep/Oct. 2007.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
High Speed Segmental Stator Type 4/3 SRM : Design, Analysis, and Experimental Verification
Journal of Electrical Engineering & Technology
2017 .09
-
Design and Optimization of Rotor Pole Holes to Reduce Radial Forcein Switched Reluctance Motor
대한전기학회 학술대회 논문집
2019 .07
-
Characteristics Analysis of Segmental Rotor Type 3-Phase SRMs
전력전자학회논문지
2016 .02
-
Switched Reluctance Motor의 자기적 구조에 대한 비교 해석
한국정보통신학회논문지
2016 .01
-
Performance Comparison of Conventional and Segmental Rotor Type Switched Reluctance Motor
Journal of Electrical Engineering & Technology
2018 .05
-
Design and Analysis of a High Speed Single-phase Hybrid 4/4 poles SRM for Hammer Beaker Application
Journal of Electrical Engineering & Technology
2018 .09
-
Axial Stress Analysis and Comparison of the Novel Dual 3-phase Axial Flux Permanent Magnet Machines
ICPE(ISPE)논문집
2023 .05
-
고속 하이브리드 4/6극 SRM의 특성 해석
전력전자학회 학술대회 논문집
2016 .11
-
Vibration Reduction Method in SRM with a Smoothing Voltage Commutation by PWM
ICPE(ISPE)논문집
2015 .06
-
Characteristics Analysis of Outer Rotor Type Switched Reluctance Motor for Washing Machine
대한전기학회 학술대회 논문집
2020 .10
-
Indirect Detection of Rotor Position of Switched Reluctance Motor Based on Flux Linkage Analytic Model
Journal of Electrical Engineering & Technology
2018 .03
-
Development and Analysis of a Two-Phase Excitation Switched Reluctance Motor with Novel Winding Distribution Used in Electric Vehicles
Journal of Electrical Engineering & Technology
2018 .11
-
Design of Direct Current excited Reluctance Motor for torque density improvement
ICPE(ISPE)논문집
2023 .05
-
Electromagnetic and Vibration Analysis of E-core Switched Reluctance Motor with Permanent Magnets and Auxiliary Windings
JOURNAL OF POWER ELECTRONICS
2019 .03
-
Design of a High Speed 4/2 Switched Reluctance Motor for Blender Application
대한전기학회 학술대회 논문집
2017 .04
-
Off-line testing for identification of rotor faults in salient pole synchronous machines
대한전기학회 워크샵
2023 .04
-
Effect of Rotor Design Modification on Noise in a Permanent Magnet Synchronous Motor
조명·전기설비학회논문지
2021 .02
-
비균일 공극형 단상 4/4극 하이브리드 SRM의 성능분석
대한전기학회 학술대회 논문집
2015 .07
-
Consequent-pole 회전자가 적용된 vernier 모터 특성 연구
대한전기학회 학술대회 논문집
2018 .04
-
Rotor pole shape optimization of axial flux dual stator doubly fed synchronous reluctance machine
대한전기학회 학술대회 논문집
2015 .10
이 논문의 저자 정보
이 논문과 함께 이용한 논문
회전자 위치추정을 위해 자기적 돌극성을 고려한 표면 부착형 영구자석 동기 전동기 설계
조정현
,
이치우
전기학회논문지
2017
.05
유한요소해석을 이용한 휠체어 휠 캠버각도에 따른 구조적 안정성 및 피로도 비교
바타르수렌 부진
,
이현주
,
최동혁
외 1명
재활복지공학회논문지
2018
.05
스마트제조 기술 국내연구 고찰
박종경
,
장태우
한국전자거래학회지
2018
.05
스마트제조를 위한 머신러닝 기반의 설비 오류 발생 패턴 도출 프레임워크
윤준서
,
안현태
,
최예림
한국전자거래학회지
2018
.05
블록체인 플랫폼의 보안 위협과 대응 방안 분석
김희열
한국정보기술학회논문지
2018
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-560-002173017