지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.26 No.1
- 발행연도
- 2017.1
- 수록면
- 1 - 5 (5page)
이용수
초록· 키워드
오류제보하기
The spurt vacuum pump is widely used to transfer sludge and slurry, and to control flow rate in a variety of processing fields, such as the oil, chemical, and fiber industries. The efficiency of the pump depends on the design parameters of the impeller, such as the number of blades, and the blade angle. In this study, the effect of the configuration of the impeller discharge angle of a spurt vacuum pump, which influences total head, shaft power, and efficiency, was numerically investigated using the commercial code, ANSYS CFX ver. 16.1. In addition, the performance of the pump was evaluated on the basis of the correlations between the total head, pump efficiency, and pressure distribution.
목차
Abstract
I. Introduction
II. Numerical Analysis
III. Results and Discussion
V. Nomenclature
IV. Conclusions
References
참고문헌 (11)
참고문헌 신청
J. E. Yun, 2011, “CFD Analysis of Submersible Slurry Pump with Two Blades”, Spring Conference of the Korean Society of the Mechanical Engineers, ISSN 1226-4881, pp. 263-268 (in Korean).
J. W. Kim, H. S. Seo, H. G. Ji, Y. K. Jung, and Y. J. Kim, 2014, “Effect of Inducer Inlet Angles on the Performance of Self-priming Vacuum Pump”, Autumn Conference of the Korean Society of Mechanical Engineers, pp. 126-131 (in Korean).
M. G. Patel, and A. V. Doshi, 2013, “Effect of Impeller Blade Exit Angle on the Performance of Centrifugal Pump”, International Jounal of Emerging Technology and Advanced Engineering, Vol. 3, Issue 1, pp. 702-706.
B. K. Gandhi, and S. N. Singh, V. Seshadri, 2002, “Effect of Speed on the Performance Characteristics of a Centrifugal Slurry Pump”, Journal of Hydraulic Engineering, Vol. 128, No. 2, pp. 225-233.
H. B. Jin, M. J. Kim, C. H, Son, and W. J. Chung, 2012, “Spiral Casing of a Volute Centrifugal Pump-Effect of the Cross Sectional Shape- ”, The KSFM Journal of Fluid Machinery, Vol. 16, No. 4, pp. 28-34 (in Korean)
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of impeller discharge angle on the performance of spurt vacuum pump
한국진공학회 학술발표회초록집
2016 .08
-
Experimental study of the effective pumping speed of dry vacuum pump due to complex vacuum exhaust line
한국진공학회 학술발표회초록집
2016 .08
-
Ion Pump Design for Improved Pumping Speed at Low Pressure
Applied Science and Convergence Technology
2016 .11
-
Design of a screw with variable pitch for dry vacuum pumps
한국진공학회 학술발표회초록집
2015 .02
-
Ion pump design for improved pumping speed at low pressure
한국진공학회 학술발표회초록집
2016 .08
-
Review of vacuum pump designations using different standards/test methodologies
한국진공학회 학술발표회초록집
2016 .08
-
Thermodynamic analysis of pumping process by twin- screw vacuum pump with variable pitch rotors
한국진공학회 학술발표회초록집
2016 .08
-
Analysis of Pumping Characteristics of a Multistage Roots Pump
Applied Science and Convergence Technology
2015 .01
-
Enhancement of Hydrodynamic Properties of Blood Pump Using Multiple Pumps Based on Synchronous Magnetic Radial Coupling
Journal of Magnetics
2018 .03
-
The flow structure prediction of an oil diffusion vacuum pump by computational fluid dynamics method
한국진공학회 학술발표회초록집
2016 .08
-
Computational fluid dynamics simulation study of gas flow in dry vacuum pump
한국진공학회 학술발표회초록집
2016 .08
-
Evaluation of efficient use of molecular drag pumps in vacuum coating systems
한국진공학회 학술발표회초록집
2016 .08
-
Methodology for Evaluating Turbo Molecular Pump Pumping Performance via Pressure Gauge Correction and Anomaly Detection
Applied Science and Convergence Technology
2024 .11
-
A new design of multiple-cavity dry scroll vacuum pump
한국진공학회 학술발표회초록집
2016 .08
-
인공월면토를 포함한 진공환경 조성
진공이야기
2020 .07
-
Progress of establishing a standard for measuring the performance of Roots Vacuum Pumps by ISO TC 112
한국진공학회 학술발표회초록집
2016 .08
-
100 years of high vacuum with the vapour diffusion pump : from mercury to oil and back
한국진공학회 학술발표회초록집
2016 .08
-
Effect of the rotor deformation of drum type traction molecular pump on pumping performance
한국진공학회 학술발표회초록집
2016 .08
-
Ensuring quiet operation in a dry scroll vacuum pump
한국진공학회 학술발표회초록집
2016 .08
-
Vacuum Characteristics of NEG combined pumping System
한국진공학회 학술발표회초록집
2018 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-420-001276256