지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 1,041 - 1,062 (22page)
이용수
초록· 키워드
오류제보하기
In this paper a method of finding optimal positions for piezoelectric actuators and sensors on different structures is presented. The genetic algorithm and multi-objective genetic algorithm are selected for optimization and $H_{\infty}$ norm is defined as a cost function for the optimization process. To optimize the placement concerning the selected modes simultaneously, the multi-objective genetic algorithm is used. The optimization is investigated for two different structures: a cantilever beam and a simply supported plate. Vibrating structures are controlled in a closed loop with feedback gains, which are obtained using optimal LQ control strategy. Finally, output of a structure with optimized placement is compared with the output of the structure with an arbitrary, non-optimal placement of piezoelectric patches.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optimal placement of piezoelectric actuators and sensors on a smart beam and a smart plate using multi-objective genetic algorithm
Smart Structures and Systems, An International Journal
2015 .01
-
Optimal sensor placement for structural health monitoring based on deep reinforcement learning
Smart Structures and Systems, An International Journal
2023 .03
-
Optimal placement of piezoelectric actuator/senor patches pair in sandwich plate by improved genetic algorithm
Smart Structures and Systems, An International Journal
2020 .01
-
Application of model reduction technique and structural subsection technique on optimal sensor placement of truss structures
Smart Structures and Systems, An International Journal
2015 .01
-
Optimization algorithms for composite beam as smart active control of structures using genetic algorithms
Smart Structures and Systems, An International Journal
2021 .01
-
Application of model reduction technique and structural subsection technique on optimal sensor placement of truss structures
Smart structures and systems
2015 .01
-
구조물의 진동장 예측 최적센서배치를 위한 유전자 알고리듬 적합함수의 선정
한국소음진동공학회논문집
2015 .10
-
유전자 알고리즘을 이용한 로봇의 최적 설계에 관한 연구
한국정밀공학회 학술발표대회 논문집
2018 .05
-
센서 시스템의 시스템 신뢰도기반 위치선정 문제
신뢰성응용연구
2023 .12
-
압전 구동기의 최적이득 식별 알고리즘
대한전기학회 학술대회 논문집
2017 .07
-
An Optimal Algorithm for the Reliability Optimization Problem of a Series System with Selectable Alternatives
Industrial Engineering & Management Systems
2021 .03
-
Comparison of Genetic Algorithm and Pattern Search Algorithm for Optimization-Based Hand Posture Prediction
대한인간공학회 학술대회논문집
2017 .11
-
유전 알고리즘을 적용한 잠수함 압력선체 최적 구조설계
대한조선학회 논문집
2017 .10
-
Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms
Steel and Composite Structures, An International Journal
2020 .01
-
RAM design optimization for a multi-unit system using a genetic algorithm
대한산업공학회 추계학술대회 논문집
2015 .11
-
Optimal placement of collocated actuators and sensors for active vibration control of cable-network antenna reflectors
제어로봇시스템학회 국제학술대회 논문집
2016 .10
-
Development of Multi-scale/Multi-objective Spatial Optimization Model Based on Genetic Algorithms
환경논총
2019 .03
-
Optimum control system for earthquake-excited building structures with minimal number of actuators and sensors
Smart structures and systems
2015 .01
-
A genetic Algorithm for scheduling problem in cell culturing with multi-type chambers
대한산업공학회 추계학술대회 논문집
2023 .11
-
효율적인 유전 알고리즘을 활용한 요격미사일 할당 및 교전 일정계획의 최적화
산업경영시스템학회지
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0