지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.3
- 수록면
- 6 - 10 (5page)
이용수
초록· 키워드
오류제보하기
The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.
목차
ABSTRACT
1. 서론
2. 샘플 준비 및 분석 과정
3. 결과
4. 결론
References
참고문헌 (12)
참고문헌 신청
Kerr, M. J. / 2003 / Limiting efficiency of crystalline silicon solar cells due to Coulomb-enhanced Auger recombination / Progress in Photovoltaics : Research and Applications 11(2):97~104
Richter, A. / 2013 / Reassessment of the limiting efficiency for crystalline silicon solar cells / IEEE Journal of Photovoltaics 3(4):1184~1191
Kerschaver, E. V. / 2000 / Stable and Reliable Metallization by Application of Electro-Formed Ni Stencils / Conference Proceedings, 16th EU PVSEC
Yao, G. / 2005 / High Efficiency Metal Stencil Printed Silicon Solar Cells
Edwards, M. B. / 2008 / Screen and Stencil Print Technologies for Industrial N-Type Silicon Solar Cells
Richter, A. / 2013 / Reassessment of the limiting efficiency for crystalline silicon solar cells / IEEE Journal of Photovoltaics 3(4):1184~1191
Kerschaver, E. V. / 2000 / Stable and Reliable Metallization by Application of Electro-Formed Ni Stencils / Conference Proceedings, 16th EU PVSEC
Yao, G. / 2005 / High Efficiency Metal Stencil Printed Silicon Solar Cells
Edwards, M. B. / 2008 / Screen and Stencil Print Technologies for Industrial N-Type Silicon Solar Cells
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of Metal Mask Screen on Solar Cell Characteristics and Metal-induced Recombination Current
한국태양에너지학회 학술대회논문집
2021 .05
-
에미터와 은 전극 계면에서 발생하는 금속 재결합 손실 분석
한국태양에너지학회 학술대회논문집
2019 .10
-
Analysis of Metal Induced Recombination and Contact Resistivity of TOPCon Solar Cells according to Poly-Si Properties and Electrode Firing Conditions
AFORE
2024 .11
-
Improvement of Stencil Mask Design for Front Electrode Screen Printing of the Crystalline Silicon Solar Cells
AFORE
2021 .10
-
Charge Separation and Recombination in Polymer Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2023 .04
-
3D Metal Printing with Laser Metal Deposition
대한기계학회 춘추학술대회
2016 .05
-
Fill Factor Loss Analysis Depending on Temperature of Silicon Solar Cells
AFORE
2023 .11
-
하이브리드 메탈 스크린 마스크 제작 및 미세선폭 인쇄기술 개발
한국정밀공학회 학술발표대회 논문집
2024 .11
-
Dependence of the Optimization of the Front Grid Design in Solar Cells
한국태양에너지학회 학술대회논문집
2020 .10
-
Poly-Si 두께와 인쇄전극 소성 온돈가 TOPCon 태양전지의 금속 재결합과 접촉비저항에 미치는 영향
Current Photovoltaic Research
2021 .12
-
Improved Carrier Tunneling and Recombination in Tandem Solar Cell with a p-type Micro-crystalline Si Intermediate Layer
한국신·재생에너지학회 학술대회 초록집
2018 .04
-
Influence of the Recombination Parameters at the Si/SiO2 Interface on the Ideality of the Dark Current of High Efficiency Silicon Solar Cells
JOURNAL OF SEMICONDUCTOR TECHNOLOGY AND SCIENCE
2015 .04
-
Analysis of Metal Induced Recombination and Contact Resistivity of TOPCon Solar Cells According to Poly-Si Properties and Electrode Firing Conditions
한국태양에너지학회 학술대회논문집
2022 .10
-
Analysis of Local Recombination on Solar Cells Through Photoluminescence Imaging
한국태양에너지학회 학술대회논문집
2020 .10
-
COVID-19 감염병 확산에 따른 일회용 마스크의 적정 관리 방안 연구
한국폐기물자원순환학회지
2021 .08
-
Modeling and Experimental Verification of the Currents Diffusion and Recombination: Application to Mono and Polycrystalline Silicon
Transactions on Electrical and Electronic Materials
2019 .01
-
Effect of Poly-Si Thickness and Firing Temperature on Metal induced Recombination and Contact Resistivity of TOPCon Solar Cells
한국태양에너지학회 학술대회논문집
2021 .11
-
금속 3 D 프린팅용 분말소재 설계 및 제조
한국정밀공학회 학술발표대회 논문집
2016 .05
-
Structure-Property Relationship: A Comparison of Charge Carrier Dynamics and Recombination in All-Polymer Photovoltaics
한국고분자학회 학술대회 연구논문 초록집
2016 .04
-
AMOLED용 Fine Metal Mask Fine Metal Mask for AMOLED
한국표면공학회 학술발표회 초록집
2020 .12
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0