지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.35 No.3
- 발행연도
- 2020.1
- 수록면
- 385 - 404 (20page)
이용수
초록· 키워드
오류제보하기
Since the scaffold is composed of modular members, the total height of multi-story scaffolds does not often meet with the headroom of construction buildings. At this time, other supporting members need to be set up on the top of scaffolds. However, the mechanical behaviors of the combined system of scaffolds and other supporting members have seldom been discussed. This study explores the stability of the combined system of scaffolds and shores. The loading tests conducted in the laboratory show that the critical load of the combined system of two-story scaffolds and wooden shores is about half that of the three-story scaffold system with the same height. In the failure of both the “scaffold system” and the “combined system of scaffolds and shores’ after loading, the deformation mainly occurs in the in-plane direction of the scaffold. The outdoor loading test shows that no failure occurs on any members when the combined system fails. Instead, the whole system buckles and then collapses. In addition, the top formwork of the combined system can achieve the effect of lateral support reinforcement with small lateral support forces in the outdoor loading test. This study proposes the preliminary design guidelines for the scaffolding structural design.
목차
등록된 정보가 없습니다.
참고문헌 (26)
참고문헌 신청
E. Błazik-Borowa / 2016 / The influence of the dimension and configuration of geometric imperfections on the static strength of a typical façade scaffolding / Archives of Civil and Mechanical Engineering 16(3):269~281
Tayakorn Chandrangsu / 2011 / Structural modelling of support scaffold systems / Journal of Constructional Steel Research 67(5):866~875
Jake L.Y. Chan / 2019 / Direct analysis of steel frames with asymmetrical semi-rigid joints / Steel and Composite Structures, An International Journal 31(1):99~112
Siu Lai Chan / 1994 / Pointwise Equilibrating Polynomial Element for Nonlinear Analysis of Frames / Journal of Structural Engineering 120(6):1703~1717
S.L. Chan / 1995 / Stability analysis of semirigid steel scaffolding / Engineering Structures 17(8):568~574
Tayakorn Chandrangsu / 2011 / Structural modelling of support scaffold systems / Journal of Constructional Steel Research 67(5):866~875
Jake L.Y. Chan / 2019 / Direct analysis of steel frames with asymmetrical semi-rigid joints / Steel and Composite Structures, An International Journal 31(1):99~112
Siu Lai Chan / 1994 / Pointwise Equilibrating Polynomial Element for Nonlinear Analysis of Frames / Journal of Structural Engineering 120(6):1703~1717
S.L. Chan / 1995 / Stability analysis of semirigid steel scaffolding / Engineering Structures 17(8):568~574
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Automatic design, planning and drawing of scaffolding system for constructions
Advances in computational design
2019 .01
-
Pilot study on patient-specific bone scaffold using 2-D femur image
대한기계학회 춘추학술대회
2021 .04
-
3SC 실용트리즈와 실험계획법을 이용한 PLGA인공지지체 제작조건에 관한 연구
반도체디스플레이기술학회지
2018 .01
-
A 4-Axis Technique for Three-Dimensional Printing of an Artificial Trachea
조직공학과 재생의학
2018 .01
-
레이저 소결 적층 시스템을 이용한 3차원 수산화인회석 인공지지체 제작에 관한 연구
한국기계가공학회지
2022 .04
-
Fabrication of Bioadhesive and Mechanically Enhanced 3D Electrospun Scaffolds
한국생물공학회 학술대회
2015 .04
-
A 3D bioprinting system and plasma-surface modification to fabricate tissue engineering scaffolds
한국표면공학회 학술발표회 초록집
2017 .05
-
브라켓의 변위가 비계 구조 안전성에 미치는 영향 분석
한국안전학회지
2017 .01
-
A Study on Metal 3D Printing Internal Pore Control for the Fabrication of Metal Scaffolds
대한용접·접합학회지
2022 .08
-
Porous Crosslinked Polycaprolactone Hydroxyapatite Networks for Bone Tissue Engineering
조직공학과 재생의학
2016 .01
-
Evaluation of Freeze-Dry Chitosan-Gelatin Scaffolds with Olibanum Microspheres Containing Dexamethasone for Bone Tissue Engineering
폴리머
2018 .11
-
Fabrication and Characterization of Polyphosphazene/ Calcium Phosphate Scaff olds Containing Chitosan Microspheres for Sustained Release of Bone Morphogenetic Protein 2 in Bone Tissue Engineering
조직공학과 재생의학
2017 .01
-
Physicochemical properties and antibacterial studies of hydroxyapatite scaffold extracted from indonesian limestone
Journal of Ceramic Processing Research
2024 .08
-
머신 러닝을 이용한 인공지지체 기공 크기 예측 모델에 관한 연구
반도체디스플레이기술학회지
2019 .01
-
Hybrid Additive Microfabrication Scaffold Incorporated with Highly Aligned Nanofibers for Musculoskeletal Tissues
조직공학과 재생의학
2019 .01
-
Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication
조직공학과 재생의학
2017 .01
-
Prolonged Release of Antibiotics from PCL-gelatin multi Scaffolds
한국생물공학회 학술대회
2019 .04
-
Novel Bio-scaffold Systems for Efficient Enzymatic Bioconversion
한국생물공학회 학술대회
2022 .09
-
폴리머 적층 시스템과 염 침출법을 결합한 3차원 다공성 인공지지체 제작
한국기계가공학회지
2016 .10
-
첨가 가공 기술을 이용한 3D 바이오 세라믹 인공지지체의 공정 개발
대한기계학회 춘추학술대회
2017 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0