메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장지환 (현대케피코) 박정환 (현대케피코) 김지석 (현대케피코) 유영수 (한양대학교) 박성욱 (한양대학교) 김형익 (현대케피코)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제30권 제2호
발행연도
2022.2
수록면
105 - 113 (9page)
DOI
10.7467/KSAE.2022.30.2.105

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, in an attempt to analyze the effect on combustion and the exhaust characteristics of the ultra-high pressure fuel injection system in the gasoline direct injection(GDI) engine, the conventional fuel injection pressure of 350 bar and the 500 bar fuel injection system were compared. To improve the delay of the needle behavior due to the fuel pressure of 500 bar, a non-magnetic ring was inserted so that magnetic force loss would not occur, unlike the low-pass method of a magnetic force transfer of the existing injector. In the process of engine evaluation, indicated mean effective pressure(IMEP) and brake specific fuel consumption(BSFC) results based on load were compared, while combustion speed and loss were calculated by additionally measuring engine combustion pressure. As a result, in terms of combustion speed and loss, the 350 bar system showed better results under the low load condition, but, as the load increased, the 500 bar system showed faster combustion speed and less loss. Lastly, in the case of exhaust gas emission characteristics, when the exhaust results for the 350 bar and 500 bar fuel injection systems were compared, NOx emission showed a higher emission at the 500 bar condition, compared to the 350 bar, as the load condition increased. Conversely, in the case of CO emission, lower emission could be confirmed at 500 bar condition as the load condition increases. This result can be considered as influencing combustion temperature according to the combustion rate. Furthermore, in the results of particle number(PN) emission, high PN reduction was confirmed by the application of an ultra-high pressure injection.

목차

Abstract
1. 서론
2. 시험 장치 및 조건
3. 시험 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0