메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
신우철 (금오공과대학교) 이호경 (금오공과대학교) 백승민 (금오공과대학교) 김우석 (금오공과대학교) 곽윤근 (금오공과대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第32卷 第10號 (通卷 第336號)
발행연도
2016.10
수록면
13 - 22 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In the design of reinforced concrete (RC) beams, the minimum ratio of flexural reinforcement is required to prevent RC member"s brittle failure. Of the many influencing factors on the Minimum Reinforcement Ratio (M.R.R), the compressive strength of concrete is one of the main factors contributing to M.R.R Specially, the coarse aggregate type determine compressive strength of concrete. Accordingly, the purpose of this experimental study is to evaluate flexural behavior of high strength RC beams using Recycle Coarse Aggregate (RCA) with the M.R.R specified in the current KBC code. To evaluate the M.R.R, nine RC beam specimens fixed with ρ=0.00395 were substituted with 0%, 30%, 50% of RCA and were used with 100%, 75%, 50% of M.R.R. The high strength concrete with a 40MPa design compressive strength is used. The test results compared with the theoretical results have a sufficient margin of safety. Although theoretical results compared with the current code calculation results have not enough safety margin when it is M.R.R of 75% and 50%. However, theoretical results compared with the code calculation results have enough safety margin at the M.R.R of 100%.

목차

Abstract
1. 서론
2. 실험
3. 실험결과 및 분석
4. 기존연구 및 설계규준식 분석
5. 결론
REFERENCES

참고문헌 (18)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-540-001649625