메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Myungchul Yoon (Dankook University)
저널정보
대한전자공학회 IEIE Transactions on Smart Processing & Computing IEIE Transactions on Smart Processing & Computing Vol.11 No.4
발행연도
2022.8
수록면
298 - 303 (6page)
DOI
10.5573/IEIESPC.2022.11.4.298

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A set of fast (m, 3)-adder circuits (4 ≤ m ≤ 7) is presented in this paper. An (m, 3)-adder adds m bits at a time and produces three outputs (N, C, S). These adders are designed to implement high-speed (7, 3)-adder based multipliers that use a (7, 3)-adder as a basic unit and five other adders ((6, 3), (5, 3), (4, 3), (3, 2), and (2, 2)-adder) as auxiliary units for the addition of partial products. Multipliers require adding tens of partial products to obtain a result, and they can be added by (7, 3)-adders more quickly than by (3, 2)-adders. In simulation results, the worst-case delay and power of the new (7, 3)-adder are 1.45 times and 2.4 times larger than those of the reference (3, 2)-adder. However, the parallel addition of partial products with the (7, 3)-adder is faster and consumes less power than with the (3, 2)-adder because the (7, 3)-adder based multiplier requires fewer adders and addition stages than a (3, 2)-adder based multiplier. This result shows that the speed of a multiplier can be increased by using (7, 3)-adders instead of (3, 2)-adders in reducing partial products.

목차

Abstract
1. Introduction
2. (7, 3)-adder based Multiplier Design
3. The Fast (m, 3)-adder Circuits
4. Experiments
5. Conclusion
References

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-569-001700978