메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Michael Newman (University of Manitoba) Matt Khoshdarregi (University of Manitoba)
저널정보
제어로봇시스템학회 제어로봇시스템학회 국제학술대회 논문집 ICCAS 2022
발행연도
2022.11
수록면
1,033 - 1,038 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Industrial robots experience low frequency vibrations at the tool induced by rapid movements, base vibrations, and process forces. In precision applications such as robotic machining, tool vibrations can lead to poor surface finish and tolerance violation. Active vibration control can suppress vibrations in real time and increase a robot’s dynamic stiffness provided the structural modes of the robot are accurately known. This paper presents a custom active damper that is capable of both automatic frequency response function (FRF) measurement and active vibration control. The active damper, which consists of a linear voice coil actuator, moving mass, and on-board accelerometer, excites the structural modes of the robot by applying a sine sweep force input. A dynamic model is derived from the FRF, which allows for efficient tuning of the direct velocity feedback controller within a simulation environment. The performance of the active damper is experimentally validated on a Staubli RX90CR industrial robot. Experimental results show a significant reduction of the dominant structural mode subject to hammer tests and base vibrations.

목차

Abstract
1. INTRODUCTION
2. DESIGN OF A CUSTOM ACTIVE DAMPER SYSTEM
3. STRUCTURAL MODEL IDENTIFICATION
4. IMPLEMENTATION OF ACTIVE VIBRATION CONTROL
5. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0